top of page
wabashvalley

Horse Box Stalls In Indiana

Our Amish made Classic Horse Stall Fronts and Dividers come with all the wood included and with grill sections in door and to the side of the door. The swinging door is 48″ wide by 60″ tall and can be hinged on either side your choice and are centered in the middle of the stall front. Our classic stall fronts and dividers measure 8′ wide to 20′ wide and are 8′ foot tall. The dividers used with these stalls are our 8′ tall basic wood and steel grill horse stall dividers which can be either all wood or wood 4′ up with steel horse stall grill on top your choice. These stall fronts need to be placed on concrete and anchored to the concrete with anchor bolts down through the stall front frame bases. Tese horse stalls are made by Amish craftsmen here in our Rockville Indiana manufacturing facility.



OUR HORSE STALLS ARE BUILT TO GIVE YOU YEARS OF DAILY TROUBLE FREE USE!


Steel Horse Stall Grills


Our horse stall grills are 7/8″ outside diameter schedule 40 11 gauge steel with a wall thickness of .109″. “We believe our stall bars are the heaviest bars used in the horse stall manufacturing industry”. Our bars are welded in place 4 inches on center giving a space of approximately 3.25 inches between the bars. The steel tubing in our horse stalls and grills will not turn or rattle. These bars do not give when pushed on.


Wood Used In Stall


Our stalls come with the wood included. The wood we use in our stalls is a number 1 grade 8 inch tongue and groove v groove southern yellow pine. The wood is clear and free of knots and is not treated or finished, it will be up to you to stain or finish the wood after you have installed the stalls in your barn. The wood in the Classic stall fronts and dividers are oriented vertically only. The wood on our stalls comes up 4 feet high unless you order all wood dividers then it will go all the way up the divider.


Powder Coated Steel Stall Frames


We offer powder coated stall frames and grills. Powder coating leaves a much harder durable finish and will extend the life of your stalls finish. Black is the standard color but we can powder coat pretty much to the color you choose. Metal on all of our stalls is sand blasted and cleaned prior to powder coating.


Our Horse Stalls Can Be Conventional, Free Standing, or Modular


If your barn does not have posts not a problem. Our fronts and dividers can attach to each other with heavy duty 1 inch diameter by 7″ long solid steel pins. Our stalls can easily be free standing or modular stalls depending on your barn situation. At the time you place your order we can discuss how your stalls will attach to your barn walls or posts or to no posts at all.


Custom Fitting Horse Stall Fronts and Dividers


The sizes priced below are even sizes however 90% of the stalls we make are made to fit customer needs. If you need a 9’8″ stall front instead of a 10′ front we can make it for you. We do not charge extra to custom make stall fronts and dividers however we do charge to the next standard size. Whatever your needs are we can make the stalls to fit them even if you are installing stalls in an old barn and you need the bottom for the stall front to be 10′ 2″ and the top to be 10′ 1″ etc. This is why we do not stock stalls and all orders are made to order.


We can make these stalls and dividers up to 20' in length.

Wabash Valley Enterprises

888-568-2035

Rockville Indiana 47872


1 view0 comments

Recent Posts

See All

Comments


bottom of page